Brick Calculator Per Square Foot India

Calculate number of bricks needed for a wall. Enter wall area in sq ft and get brick count including mortar.

Brick Work Estimator (With 5% Mortar Wastage)

Estimated Red Clay Bricks945 Bricks

Understanding Brick Calculator per Square Foot & Wall Area (Indian Standard)

Accurately estimating bricks for home construction in India prevents expensive project stoppages and surplus scrap piles. Traditional Indian red clay bricks (modular standard: 190 × 90 × 90 mm; traditional field size: 9" × 4.25" × 2.75") are laid in two primary wall thicknesses: 4.5-inch partition walls (half-brick masonry) and 9-inch load-bearing exterior walls (full-brick masonry). According to CPWD (Central Public Works Department) Delhi Schedule of Rates (DSR), 1 cubic meter of brick masonry requires approximately 500 bricks. For quick surface area estimation, structural estimators use the thumb rule of 4.5 bricks/sq ft for 4.5" walls and 9 bricks/sq ft for 9" walls, plus a 5% to 10% allowance for handling breakage and cut pieces.

Official Formula & Conversion Factor

Verified Standard
Bricks for 9" Wall = Wall Area (sq ft) × 9.0 × 1.05 (with 5% wastage) | 4.5" Wall = Area × 4.5 × 1.05

4.5-inch Single Brick Wall (Parda) = 4.5 to 5 Bricks per sq ft. 9-inch Double Brick Wall (Main wall) = 9 to 10 Bricks per sq ft (includes 10% wastage).

Step-by-Step Worked Conversion Examples

100 sq ft 4.5" Interior Partition Wall
100 × 4.5 × 1.05
473 Bricks (~500 bricks ordered)
100 sq ft 9" Exterior Main Wall
100 × 9.0 × 1.05
945 Bricks (~1,000 bricks ordered)
1,000 sq ft Wall Area for 2-BHK House
1,000 × 9.0 × 1.05
9,450 Bricks (~9,500 bricks ordered)

Standard Brick Calculator per Square Foot & Wall Area (Indian Standard) Reference Table

Wall Area (sq ft) Number of Bricks & Mortar Volume Equivalence / Notes
50 sq ft Wall Area 225 Bricks (4.5" wall) 450 Bricks (9" wall)
100 sq ft Wall Area 450 Bricks (4.5" wall) 900 Bricks (9" wall)
200 sq ft Wall Area 900 Bricks (4.5" wall) 1,800 Bricks (9" wall)
500 sq ft Wall Area 2,250 Bricks (4.5" wall) 4,500 Bricks (9" wall)
1,000 sq ft Wall Area 4,500 Bricks (4.5" wall) 9,000 Bricks (9" wall)
1,500 sq ft Wall Area 6,750 Bricks (4.5" wall) 13,500 Bricks (9" wall)
2,000 sq ft Wall Area 9,000 Bricks (4.5" wall) 18,000 Bricks (9" wall)
5,000 sq ft Wall Area 22,500 Bricks (4.5" wall) 45,000 Bricks (9" wall)

Frequently Asked Questions

How do I deduct for doors and windows in brick calculation?

Calculate the total gross area of the wall (Length × Height). Next, calculate the surface area of all door frames and window openings (Width × Height) and subtract this opening area from the gross wall area before multiplying by the brick factor.

How do Fly Ash and AAC Blocks compare to red clay bricks?

Standard AAC (Autoclaved Aerated Concrete) blocks measure 600 × 200 × 150/200 mm, meaning 1 AAC block replaces approximately 8 to 9 red clay bricks. AAC blocks reduce dead load on foundations and require thin-bed adhesive rather than thick cement-sand mortar.

How much cement and sand mortar is needed per 1,000 bricks?

For 1,000 standard bricks laid in 1:6 cement-sand mortar ratio, you will need approximately 3.5 to 4 bags of OPC/PPC cement (50 kg each) and approximately 22 to 25 cubic feet (CFT) of river or M-sand.

Reviewed & Verified by Vijay Pandit • Last Updated: October 2026