TMT Steel Bar Weight Calculation Formula (D²/162) Explained
The standard engineering formula for steel bar unit weight is D²/162. Learn its mathematical derivation from steel density (7850 kg/m³) and view the full rebar weight chart.
On any Indian construction site, reinforcement steel (TMT bars — Thermo-Mechanically Treated) is ordered in tonnes or quintals but specified in structural drawings by diameter (e.g., 8mm, 10mm, 12mm, 16mm, 20mm, 25mm). To verify that deliveries from rolling mills are not underweight or overweight, site engineers use the famous civil engineering formula: **Weight per metre = D² ÷ 162.28** (conventionally rounded to D²/162). Here is the full mathematical derivation and verification chart.
Mathematical Derivation of the D²/162 Formula
Why does dividing the square of diameter by 162 give the weight in kilograms per metre?
1. Cylinder Volume Formula: A steel bar is a cylinder with diameter $D$ (in mm) and length $L = 1\text{ metre} = 1,000\text{ mm}$. $$\text{Volume} = \frac{\pi}{4} \times D^2 \times L = \frac{3.14159}{4} \times D^2 \times 1,000 = 785.4 \times D^2\text{ mm}^3$$
2. Density of Steel: Under standard Bureau of Indian Standards (IS 1786), the density of structural steel is 7,850 kg/m³ (or $0.000007850\text{ kg/mm}^3$).
3. Calculate Weight: $$\text{Weight} = \text{Volume} \times \text{Density} = (785.4 \times D^2) \times 0.000007850 = 0.0061654 \times D^2\text{ kg/m}$$
4. Invert the Decimal to a Denominator: $$\frac{1}{0.0061654} \approx 162.28$$
Thus: $$\mathbf{\text{Weight (kg/m)} = \frac{D^2}{162.28} \approx \frac{D^2}{162}}$$
Standard TMT Rebar Weight Chart (IS 1786)
Standard TMT bars in India are manufactured in lengths of 12 metres (approximately 40 feet). Below are the statutory nominal weights:
| Bar Diameter (D) | Weight per Metre (kg/m) | Weight per 12m Bar (kg) | Permissible IS Tolerance | Standard Bundle Quantity |
|---|---|---|---|---|
| 8 mm | 0.395 kg | 4.74 kg | ±7% | 10 to 12 bars |
| 10 mm | 0.617 kg | 7.40 kg | ±7% | 7 to 8 bars |
| 12 mm | 0.888 kg | 10.66 kg | ±5% | 5 bars |
| 16 mm | 1.578 kg | 18.94 kg | ±5% | 3 bars |
| 20 mm | 2.466 kg | 29.59 kg | ±3% | 2 bars |
| 25 mm | 3.853 kg | 46.24 kg | ±3% | 1 bar |
| 32 mm | 6.313 kg | 75.76 kg | ±3% | 1 bar |
How to Detect Underweight Rebar at Site
Commercial suppliers sometimes supply 'commercial rolling' steel where the core diameter is shaved by 0.5mm, reducing weight by up to 10%: 1. Cut 3 random 1-metre samples from delivered bundles. 2. Weigh them precisely on a calibrated digital scale. 3. Compare the weight against the standard chart. 4. If an 8mm bar weighs less than 0.367 kg/m (-7% limit), reject the delivery under BIS non-compliance.