Sand Aggregate Calculator India Concrete

Calculate sand and aggregate quantities needed for concrete work based on mix ratio and volume.

Sand & Aggregate Material Estimator

River Sand42.0 CFT~0.42 Brass
Aggregate (Grit)84.0 CFT~0.84 Brass

Understanding Sand & Aggregate (Bajri & Kapchi) Calculator for Concrete (India)

In Indian structural concrete execution, coarse river sand or manufactured sand (M-Sand / bajri) and blue granite crushed stone aggregates (kapchi / gitti / 10mm & 20mm metal) make up nearly 70% to 75% of the total concrete matrix. For the standard residential nominal mix M20 (1 part cement : 1.5 parts sand : 3 parts coarse aggregate by volume), site supervisors calculate truckload requirements in CFT or Brass. A well-graded aggregate blend combining 60% 20mm aggregate and 40% 10mm aggregate minimizes void spaces, producing dense honey-comb free concrete.

Official Formula & Conversion Factor

Verified Standard
Sand (CFT) = Number of Cement Bags × 1.875 | Aggregate (CFT) = Number of Cement Bags × 3.75

For M20 Mix (1:1.5:3): Every 1 Bag of Cement requires 1.88 CFT of Sand and 3.75 CFT of 10mm/20mm Coarse Aggregate.

Step-by-Step Worked Conversion Examples

100 Bags Cement Batch (Residential RCC Slab)
100 × 1.875 (Sand) | 100 × 3.75 (Aggregate)
187.5 CFT Sand (~1.88 Brass) & 375 CFT Aggregate (~3.75 Brass)
50 Bags Cement Batch (PCC flooring & lintels)
50 × 1.875 (Sand) | 50 × 3.75 (Aggregate)
93.8 CFT Sand (~0.94 Brass) & 187.5 CFT Aggregate (~1.88 Brass)
250 Bags Cement Batch (Multi-storey roof pour)
250 × 1.875 (Sand) | 250 × 3.75 (Aggregate)
468.8 CFT Sand (~4.69 Brass) & 937.5 CFT Aggregate (~9.38 Brass)

Standard Sand & Aggregate (Bajri & Kapchi) Calculator for Concrete (India) Reference Table

Cubic Feet (CFT) / Brass Sand (CFT) & Coarse Aggregate (CFT) Equivalence / Notes
10 Cement Bags 18.8 CFT Sand 37.5 CFT Aggregate (10/20mm)
25 Cement Bags 46.9 CFT Sand 93.8 CFT Aggregate
50 Cement Bags 93.8 CFT Sand 187.5 CFT Aggregate (1.88 Brass)
100 Cement Bags 187.5 CFT Sand (1.88 Brass) 375.0 CFT Aggregate (3.75 Brass)
200 Cement Bags 375.0 CFT Sand (3.75 Brass) 750.0 CFT Aggregate (7.50 Brass)
300 Cement Bags 562.5 CFT Sand (5.63 Brass) 1,125.0 CFT Aggregate (11.25 Brass)
500 Cement Bags 937.5 CFT Sand (9.38 Brass) 1,875.0 CFT Aggregate (18.75 Brass)
1,000 Cement Bags 1,875.0 CFT Sand (18.75 Brass) 3,750.0 CFT Aggregate (37.50 Brass)

Frequently Asked Questions

What is M-Sand and how does it compare to River Sand in India?

M-Sand (Manufactured Sand) is crushed granite rock processed through VSI (Vertical Shaft Impactor) machines and washed to meet IS 383 Zone-II grading. Unlike river sand, which often contains harmful silt and organic clay, certified M-Sand has uniform cube-shaped grains, zero silt, and is environmentally sustainable and approved by CPWD.

Why is a combination of 10mm and 20mm aggregate used in roof slabs?

Using 20mm aggregate alone leaves large voids between stones. Adding 35% to 40% of 10mm down aggregate fills the interlocking micro-cavities, ensuring maximum concrete compaction around dense steel rebar cages and preventing honeycombing.

How do I test silt content in sand on site?

Fill a transparent glass measuring cylinder with 50 ml of sand, add 100 ml of clean water with a pinch of common salt, shake vigorously, and let it settle for 3 hours. The silt forms a distinct darker layer on top of the sand. If the silt layer exceeds 8% of the sand height, the sand must be washed before use in RCC.

Reviewed & Verified by Vijay Pandit • Last Updated: October 2026